|
|
下载中心
| 开发商: |
Flight1 |
| 软件大小: |
4.18 GB |
| 兼容平台: |
P3d v2 其它 |
| 飞卡售价: |
6 飞卡 |
| 下载地址: |
- |
Flight1 - 终极交通 v2.09 2015 军事 GA交通V2.07 2015 [最新FSX-P3D版].txt
(74 Bytes, 下载次数: 9, 售价: 6 飞卡)
Flight1 - 终极交通 v2.09 2015 + 军事+ GA交通V2.07 2015 [最新FSX-P3D版]
产品特点
550,000+实时定期航班 - 终极交通2将为用户提供了基于现实航空公司时间表550,000+的定期航班。这些方案包括国际，国家，区域，通勤，甚至航空货运运营商。航班时刻表触摸飞行模拟器X世界的每一个角落。
1,300,000+通用航空飞行 - 除了商业计划航班，最终流量2将为用户提供超过130万通用航空飞行。这些航班6400机场之间飞行，记录每星期超过250万飞行小时。
100的全球航空公司的 - 周围的天空所有的流量嗡嗡不会是正确的，如果你不支持这些飞定期航线航空公司。终极交通2包含了超过1600架各种世界各地的航空运营商，既大又小的重绘。该软件包包含了超过90架飞机类型，为用户提供多种飞机的风景，增加了一个独特的感觉，是仅次于你是一个真正的机场铁丝网之外。
6000+机场与交通 - 终极流量2为用户提供了AI流量超过6000个机场。最终的结果是积极的机场环境，无论您是拍摄于28L的方法在旧金山国际，或飞行粮食供应的虚拟负载到阿拉斯加的上游。
全功能接口 - 终极交通2接口包含一个铆钉破坏，对不能找到其他地方的选项聚宝盆。接口是由提供的选项和特征的整个主机同时处理新手用户和电力用户的需要。
加载项时刻表 - 创建和管理定制的附加时间表终极流量可以使用终极交通专有的工具，让终极流量2显示在FSX这些飞行创建2.完整的虚拟航班时刻表。
航空公司/机场打印时刻表 - 终极流量2还为用户提供了组织能力和打印时间表的终极交通2世界上任何一家航空公司。 UT2具有打印中所包含的包中的AI流量的机场专用时间表的能力。这些打印输出的设计类似，你可以找到在当地的机场，为您最喜爱的航空公司的时间表。
飞行计划分配 - 每家航空公司飞行终极交通2使用的飞行计划从出发机场到目的地机场的导航。这些飞行计划，也可定做。指定任何FSX风格的飞行计划，使用此功能飞行。
飞行查看地图 - 创建的任何地方在这个星球上的地图视图和查看所有业务目前飞行在那个位置。独特的过滤器允许所有以非常具体的流量进行显示。仿真率可以及被改变。
状态 - 查看现场状态板上的任何处理商业交通的终极交通2.查看出发和到达板独特的外观，在交通机场机场。
飞机尾号/停车位码 - 每家航空公司都可以有自己的规则产生一个尾号。 UT2使用这些规则生成随机尾号为数据库中的每一个航班。用户还可以管理和分配停车位代码的任何FSX飞机。
P3D安装方法
"Approximately" because it likely will not be underlined files and folders will not be Roaming (I zabekapit it for yourself). Once we verify that we have registered the schedule on the path C: Users Enzzo AppData Roaming Flight One Software Ultimate Traffic 2 Databases (a bunch of files).
I had a place on the system SSD and I suffered a folder with the aircraft (UT2 Aircraft) from the installation folder E: FOR GAMES Ultimate Traffic 2 SimObjects UT2 Aircraft directly to the system C: UT2 Aircraft. Doing this is not necessary. As a result, UT2 were scattered on two discs other than discs with simulators - in my opinion the most "advanced" version of the installation.
(Since we put UT2 in an unfamiliar place, when you start it immediately asks, "And I de? 'Path to FSX. Therefore, if there is no AYCha, should immediately attend to the presence somewhere folder fsx.exe (you can slip from the root Prepara) and what a decent fsx.CFG the path C: Users Enzzo AppData Roaming Microsoft FSX)
UPD. Possible. Open the C: Users Enzzo AppData Roaming Flight One Software Ultimate Traffic 2 UT2Settings.cfg and enter:
[Main]
FSX cfg File Location = C: Users Enzzo AppData Roaming Lockheed Martin Prepar3D v2 Prepar3D.cfg (CCF file path to the desired simulator)
hideDisclaimer = 1
hideBackup = 1
FSX Location = d: Prepar3D v2 (the path to the root of the desired simulator)
Add in the config file path to the desired sim trafikovyh aircraft. In section [Main], with the correct serial number:
SimObjectPaths.6 = C: UT2 Aircraft
Near the .CFG file Sim, if no, then we put the file exe.xml as follows:
Launch
EXE.xml
False
False
False
False
UT2
E: FOR GAMES Ultimate Traffic 2 Flight One Software Ultimate Traffic 2 UT2Services.exe
True
... Or add to the selection available.
Everything is now possible to run E: FOR GAMES Ultimate Traffic 2 Flight One Software Ultimate Traffic 2 UltimateTraffic2.exe, show him the desired path, wait compile schedules and set up everything else.
We got the "core" of traffic and it can connect to the desired sim. To do this, copy the correct root folder
E: FOR GAMES Ultimate Traffic 2
Effects (in AYCH the replacement, in Rev. 2.5 ... I'm not all replaced, something that the left by default. Not so simple it with effects)
Scenery (if it is set ext. Business jet traffic. Here the schedule)
SimObjects GroundVehicles (related airfield traffic)
Sound (pre-clear to the thread former Sound ATC)
Texture
I've found airlines.cfg, with the call to set trafom PBX is copied to the root of FSX, but for Prepar 2.5 in C: ProgramData Lockheed Martin Prepar3D v2
Aych from that moment you can run.
For Prepar 2.5 need to perform the operation similar to that described above. but C: Users Enzzo AppData Roaming Lockheed Martin Prepar3D v2 exe.xml and add the path to the aircraft traffic in the C: ProgramData Lockheed Martin Prepar3D v2 simobjects.cfg - to finish with the correct sequence:
[Entry.9]
Path = C: UT2 Aircraft
|
|
|
发表于 2015-12-18 11:03:42
收藏